Ananolg Electronics Lab

The area of Electronics devices and Circuits covers Analog Electronics Lab. It houses a large number of state of the art equipments like Oscilloscopes, Function Generators, Power Supply units and Linear IC Trainer Kits. Using these students can perform experimentation on verification of Network theorems, applications of Diodes and Op-Amps, design of Oscillators and Amplifiers.

Digital Electronics Lab

The department has full fledged laboratory in the area of Digital Electronics. The lab houses Digital IC Trainer Kits. Using these students can perform experimentation on realization, verification of various Digital Circuits like Adders, Subtractor, Multiplexers, Demultiplexers, Encoders, Decoders, Flip-Flops, Registers and Counters.

Analog Communication and LIC Lab

Analog Communication Laboratory provides an opportunity for experimental learning of the concepts of analog communication systems. This lab includes experiments on applications of Op-Amps, timers; Phase Locked Loops, Analog Modulation techniques. This lab is equipped with Oscilloscopes, Function Generators, and Power Supply units.

Advanced Communication Lab

The Advanced Communication Laboratory covers design and verification of the concepts of modern digital communication systems that operates from MHz-GHz range. These labs include experiments on applications of Digital coding and modulation techniques, Fiber Optic Communication, Characteristics of microwave waveguide components and MMIC components. This lab is equipped with Oscilloscopes, Function Generators, Modules for Digital Modulation and Demodulation techniques and Power Supply units.

To enhance precise measurement and observe waveform with better clarity APLAB Digital Storage Oscilloscopes are used. Three MMIC test benches and three microwave test benches are used to conduct experiments in GHz frequency range. Various digital coding and modulation kits are used apart from discrete components to demonstrate the basic concepts involved in digital communication and NI MULTISIM is used to simulate these circuits and verify the results. An OFT kit is used to demonstrate communication and multiplexing through Light waves.

DSP Lab

This lab is primarily divided in to Simulation and Emulation. Using MATLAB the DSP operations such as Linear and Circular Convolution, Auto and Cross Correlation, Verification of Sampling Theorem, Computation of FFT and IIR and FIR Digital Filter Design are simulated. These same experiments are emulated using TMS DSK6713 Kits.

Microprocessor Lab

The Microprocessor 8086 Lab curriculum includes both software and interfacing modules. The objective of the lab with respect to software module is to understand the types of data transfer, to perform arithmetic and logical operations, bit and string manipulation instructions, branch/loop instructions. This is executed by making use of High Level Assembler, Macro Assembler, MASM. Intel 8255 PPI cards used with Intel 8086 to execute interfacing programmes which include Matrix Keyboard interfacing, Seven Segment Display interfacing, Logical Control Interfacing, Stepper motor interfacing etc.

HDL Lab

The main objective of the lab is to teach students the method of synthesizing complex digital systems. For this the HDL lab provides full fledged of XILINX design flow using Spartan 3 tools. The students learn two HDL languages VHDL and Verilog HDL. Interfacing Modules such as DAC, Hex Key pad, Calculator, Speed Control of Stepper and DC motors are programmed making use of the interfacing kit.

Microcontroller Lab

The Microcontrollers 8051 Lab curriculum includes both software and interfacing modules. The objective of the lab with respect to software module is to understand the types of data transfer, to perform arithmetic and logical operations, branch and subroutines, Bit Addressability. This is executed by making use of Keil MicroVision Simulator. Interfacing Modules such as Dual DAC, Hex Key pad, Elevator, Calculator, Temperature Controller and Speed Control of Stepper and DC motors are programmed making use of four I/O Ports which are integral part of 8051.

VLSI Lab

The VLSI lab provides full fledged of ASIC design flow using Mentor Graphics Tool with 90 & 40nm Technology. Mentor Graphics tool includes software like ModelSim, Xilinx, Leonard Spectrum for front end design; Calibre, IC Flow and AMS Software for backend design.

Some of the ASIC Digital Designs performed are Adders, Multipliers etc. The Code is written in VHDL or Verilog, Simulated, synthesized and verified using Test bench.

Some of the Analog Designs performed are Op-Amp, R-2R DAC etc. All these designs are verified by DC, AC, Transient Analysis and LVS, DRC, ERC are verified. Finally RC extraction and back annotation completes the design verification.

Power Electronics Lab

Power Electronics lab is an application of study of the most of the industrial controls at higher power requirements. The lab with is sophisticated equipments are used for the implementation of power electronic units like Choppers, Inverters, Converters, AC Voltage Regulators etc. Power devices like Thyristors, Power UJTs, MOSFETs, IGBTs are used for the realization of these control circuits. Different modules specifically designed to perform the experiments like Analysis of different Power devices, Triggering methods, Commutation Techniques and Speed control methods for various motors are being used.

DCLD Lab

This lab aims at simulation and testing minimal length binary code, BCD Decoder, Multiplexer, Code Converters using HDL.

CMOS VLSI Design Lab

Using Mentor Graphics tools the ASIC Design Flow of Inverters, Buffers, Transimission gates, Flip - Flops, Counters and Successive Approximation Registers are Verified and Synthesised.

Advanced Embedded Systems Lab

This lab is setup for the benefit of both UG and PG students in the field of Embedded Systems. The lab facilitates to learn the simulation and PCB implementation of Circuits using Multisim and Ultiboard. Virtual Instrumentation could be done using NI Labview tools. The hardware realization of the circuits can be verified using NI ELVIS board. For the real time experience the RTOS programmes can be written and verified.

Modern DSP Lab

This lab uses MATLAB tools and Texas Instruments' TMS DSK6713 Kits. The Poles and Zeros, frequency response of IIR and FIR Digital Filters, Concepts of Time Domain Windowing, Hamming Windowing, Kaiser Windowing, Comparisaions between DFT and DCT are simulated. The experiments on image sampling, computation of Fft, Fourier Transforms, Inverse Fourier Transforms, delayed auditory feedaback signal are emulated using Texas Instruments' TMS DSK6713 DSP Processor.

Technical Events Organized in the Year 2011 by Dept of Electronics and Communication Engineering, East West Institute of Technology - Click here

• One day technical seminar conducted on "present trends of nature inspired research in the development of automated intelligent solution" On 18th Feb-2011 by Dr.Manoj Kumar , Dept. of Nanotechnology , IISc, Bangalore .

  • Inauguration of Faculty Development Program FDP-18th Feb-2011
    
  • Keynote Speaker: Dr. Manoj Kumar Singh
    
  • Discussions - FDP Program
    
• Three days workshop on VLSI and FPGA design Conducted on 8th, 9th and 10th of April 2011

  • Inauguration of NXG 3 day Workshop 8th April 2011
    
  • Valedictory Function NXG Workshop 9th April 2011
    
  • Participants of 3 day Workshop 10th April 2011
    
• NATIONAL CONFERENCE on Advances in Electronics and Intelligent Computing-2011 (NCAEIC-11)
  Dept of Electronics and Communication Engg.,EAST WEST INSTITUTE OF TECHNOLOGY,Bangalore-91

  • Conference Banner
    
  • Reception Committee 2nd May 2011 NCAEIC_11
    
  • Audience and Participants 2nd May 2011 NCAEIC-11
    
  • 
  • Keynote Speaker and Guests on the Stage 2nd May 2011 NCAEIC-11
    
  • CD Inauguration 2nd May 2011 NCAEIC-11
    
  • Release of Conference Proceedings 2nd May 2011 NCAEIC-11
    
  • Keynote Speaker Dr. M.H.Kori Lecture 2nd May 2011 NCAEIC-11
    
  • Participants -2nd May 2011 NCAEIC-11
    
  • Session-Chairs -2nd May 2011 NCAEIC-11
    
  • NCAEIC-11 Staff and Students Committee - 2nd May 2011
    
  • 1st Prize Winner NCAEIC-11
    
  • 2nd Prize Winner NCAEIC-11
    
  • 3rd Prize Winner NCAEIC-11